Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2010 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Instrument Cluster Connections 700

posted by  RobertF on  Tue Jun 21 05:01 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need help reconnecting the instrument panel's wires to a 1986 740 turbo. My charging and temperature guages are not functioning properly. Thank you.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Instrument Cluster Connections 700

    posted by  Steve on  Tue Jun 21 11:36 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 07:16 CST 2014
    [RELATED]

    This is where the Volvo OEM wiring diagram really helps. Thre is a four-pole connector on the back that powers the speedo and voltmeter. There is another seven pole connector that runs the temp sensor. Make sure these are secure and uncorroded.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Instrument Cluster Connections 700

    posted by  raidman on  Tue Jun 21 10:52 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Apr 4 22:17 CST 2014
    [RELATED]

    Rob:
    I have an 86 non-turbo 745. Is your cluster an ADO (german) or Yazaki (japanese)?
    My speedometer works sprodically in my OEM ADO cluster, but when I replaced it with a Yaz, the speedo works, but the fuel guage doesn't work.
    Maybe we can help each other with this problem.
    cheers,
    el raidman








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Instrument Cluster Connections 700 1986

      posted by  RobertF on  Thu Jun 23 04:20 CST 2005
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

      I have two clusters and they are both Yazaki as printed on the circuit. There are three cable connectors that are easy to connect and then a few single wires that I forgot where to place them. I may have to return to the junk yard and observe the correct connections.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.