Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bleeding Brakes on 240 wagon blues 200

posted by  johnny6 on  Mon Apr 11 09:35 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need to do a total bleed on my '87 240 DL wagon. I've been having some problems.

1-I seem to be getting sepage through the bleeder valves. I tried to open them the correct amount but these are new rebuilt calipers and the bleeder valve is very loose and maybe opening more than it should. (?) It also looks like there are really tiny bubbles being drawn in from where the tube goes over the bleed valve. Is this a result from valves being open too much?

2-Having a really hard time getting all the air out. Should the cap on the master cylander fluid container be on or off during this? Also do I have to do all three at same time when it comes to front calipers or can I do one at a time.

Any and all help appreciated.

John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bleeding Brakes on 240 wagon blues [200]
posted by  johnny6  on Mon Apr 11 09:35 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.