Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2007 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

code 3-1-4 900 1992

posted by  someone claiming to be ubhi on  Tue Apr 5 01:55 CST 2005 [RELATED]

hi my 92-960 gave a code 3-1-4. where is camshaft sensor loacted and how to replace it?

thanks
92-960 366000km








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    code 3-1-4 900 1992

    posted by  DanR on  Tue Apr 5 02:51 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu Oct 23 15:25 CST 2014
    [RELATED]

    The connection is at the back of the head, there are two connectors there. One is for the RPM sensor(two wires) and the other is the cam sensor(3 wires).

    It is not unusual for the sensor to fail, but the first thing I would do is clean the connection first. It is very sensitive to resistance. The sensor
    itself is at the back of the head inline with the exhaust cam on the passenger side.

    It may only be the connection.

    DanR 94 964 278,000 miles (44,000 on the new engine)
    --
    DanR







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.