Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2006 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pump spring and plunger change(Dewfpo) S90-V90

posted by  poolman on  Sun Oct 17 07:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 26 02:03 CST 2010
[RELATED]

Back again, I've read the faq about the oil pump spring plunger being plastic and thinking about changing out the part while I've got the front section down this far just for saftey purposes. Question does the crank have a central bolt holding the balancer on I need to back out ,or is there just the small bolts around the balancer holding it on? I guess theres gotta be a center bolt to keep every thing tied down. Ever done this job? All thoughts app.
Thanks
Poolman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil pump spring and plunger change(Dewfpo) [S90-V90]
posted by  poolman  on Sun Oct 17 07:35 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.