Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Ok To Install Camshaft Sprocket in Intermediate Sprocket? 200 1985

I had a lot of trouble removing the Intermediate Sprocket to replace the oil seal. I put the intermediate sprocket and crankshaft sprocket next to each other and they align perfectly. The only difference is that the camshaft sprocket has more holes, so it would be easier for me to jam an object into the sprocket to help remove it once it's on the intermediate shaft. So, I'm wondering if it's ok to install a camshaft sprocket in the intermediate sprocket space (I have a clean junkyard camshaft sprocket ready to go).








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Ok To Install Camshaft Sprocket in Intermediate Sprocket? 200 1985


    a) You are having trouble removing the intermediate sprocket;
    b) the camshaft sprocket has more holes for jamming an object into;
    c) so if you put the camshaft sprocket in place of the intermediate sprocket, it will make it easier to remove the...intermediate sprocket???








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Ok To Install Camshaft Sprocket in Intermediate Sprocket? 200 1985

    hi there, when i did mine i mixed them up and forgot to mark them, my friend and 16 year volvo mechanic told me use either one their interchangeable, it worked for me.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.