Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

flame trap 200 1990

Would anyone have a picture to show me where the flame trap is on my 1990 240?
thanks in advance.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

flame trap 200 1990

If you look in the FAQs you can see a drawing showing the location, and a picture of what the flame trap looks like: http://www.brickboard.com/FAQ/700-900/EngineSealsBeltsVent.htm#Flame_Trap_Crankcase_Ventilation_Questions

Hope this helps.

Mike
--
Mike Brown Greenville, NC 1996 965 105K 1994 940 135K 1986 244 137K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

flame trap 200 1990

there's a box coming off of the block on the drivers side under manifold #3, follow the tubing up and you'll see two tubes coming together with a little tube attached to the side of the intake manifold. that is it.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

flame trap 200 1990


No picture, but look down at your intake manifold. It is located between the ports for cylinders 3 and 4. A couple hoses come out of it.



Jim 90 244DL 232K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.