I recently got some fog lights, but am somewhat confused by the wiring. One fog light has a black connector (ground) with a female spade lead. The hot lead is white/black with a female bullet connector. The other fog light has brown (ground) and black (hot) wires going to a round 2-pin type connector. The wiring harness I got has green leads for the lights as female spades. Does anyone out there know what the correct leads coming from the lights should be? Also, since it appears there is only hot leads from the harness, where do the ground connections go to from the lights?

Thanks,
Jeff

i have the instruciotns for installing bosch pilot
fog lights scanned...do you want me to email
them to you?....they might help out...
happy new year
~phil

That would be OK, I already have the photocopy of the Volvo installation instructions. Further research has found that one fog has 740 connections, the other has BMW connections. Therefore, I either need to have some knowledgeable brickster tell me what the connections should be at the end of the small harness that attaches to the lights so I can modify what I have, or obtain proper small harnesses to attach to the main fog light harness.

Thanks,
Jeff