Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

sealants 2001

posted by  brick8 on  Thu Aug 28 10:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Nov 11 07:36 CST 2013
[RELATED]

I am fighting a small war with oil leaks from my 1988 740 turbo. I recently changed the valve cover gasket and did not use any sealant. I plan to remove and replace it this weekend, this time with a sealant. I also have a leak from the pipe that runs from the turbo to the hole near the bottom of the block on the passenger side. I don't want to remove the manifold and turbo in order to refit this one, so I plan on using sealant (lots of sealant) there too.

Does anyone have any recommendations on the type(s) and brand(s) of sealant to use for these tasks?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New sealants [2001]
posted by  brick8  on Thu Aug 28 10:10 CST 2003 >
  • New sealants [2001]
    posted by  rstarkie subscriber  on Thu Aug 28 11:13 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.