Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Hall Sensor needed 200 1983

I need a Hall Sensor (impulse sender) for a 1983 240 DL b23f. Has a 3 prong connector that comes out of the distributor about 5 inches.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Hall Sensor needed 200 1983

    There is a 240 series distributor for sale on EBay. The link is:

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33690&item=2427220860

    It might be worth your time to look at the auction. If this is your distrubutor it seems more than worth to get this distributor for only $15 + $11.50 S/H. I heard the HALL SENSORS are a real pain in the butt to mess with. Good Luck!!!

    Sincerely,

    Nickvjr
    1979 264GL 119,900








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Hall Sensor needed 200 1983

    And you are where?
    --
    1980 245 Canadian B21A with SU carb and M46 trans








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Hall Sensor needed 200 1983

      I am in Pennsylvania, in the Lehigh Valley.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.