Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2018 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing Idle Air Control motor/Valve 200

posted by  someone claiming to be jim g on  Tue Jul 22 06:36 CST 2003 [RELATED]

Which way should the arrow on the IAC Valve point? Toward the engine block (toward the hose that connects to the back of the intake manifold)or toward the hose that leads to the stub on the air intake flex hose? I think the engine will run and idle in both positions. Thanks, Jim








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Installing Idle Air Control motor/Valve 200

    posted by  Steve on  Tue Jul 22 07:44 CST 2003
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 07:16 CST 2014
    [RELATED]

    The IAC routes idle air from the stub on the air intake hose, around the closed butterfly plate in the throttle body, into the intake manifold. That's the direction of flow.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.