Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2018 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

444 axle differences, part 2 444-544

posted by  someone claiming to be gert on  Mon Jul 21 08:37 CST 2003 [RELATED]

Pete wrote:
The difference is in the "railway tunnel" rubber bush the 544 has clamped round its axle. Also a 544 has a torque rod assembly on top of the banjo housing, which from memory an early 444 doesn't have.

Allright Pete, but is that why the mounting points for the rear suspension legs are positioned in a different way on my '52 444 axle when compared to a 544 axle ? On both types these legs were the same, weren't they ? But it appears I can't use the 544 mounting points for my 444 suspension legs. I have to cut them off and weld on the 444 mountings. Now this can and will be done of course, but I would like to know the reason why.

Regards
Gert






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 444 axle differences, part 2 [444-544]
posted by  someone claiming to be gert  on Mon Jul 21 08:37 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.