Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230FT Breather Box size 700

posted by  werick on  Thu May 15 07:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 6 08:25 CST 2011
[RELATED]

Hi All:

I recently replaced the B230FT Engine on my 1986 turbowagon with one from a 1992 Wreck. It's been running fine, but I've noticed slightly positive Crankcase Presuure during idle. It becomes negative when the Engine speeds up. I bought a new 1986 Breather Box from Volvo during installation. I noticed the Breather Box that came with the 1992 Engine was much larger, although they both have the same bolt pattern. What's the reason for this increase in size? Should I have used the 1992 instead of the 1986?

Thanks
Warren






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 B230FT Breather Box size [700]
posted by  werick  on Thu May 15 07:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.