Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Electric fan size...14' or 16' blade??? 200

Hey all,
Going to go ahead with the conversion in a few days but wondering which size fan works best for primary cooling and correct fit...14" or 16"? Or would both sizes work fine depending on the overall dimensions? Recommendations are greatly appreciated, and thanks in advance!!
-Adam
--
'92 244GL silver-metallic, 142k, Hella 550 Front Fogs, K&N filter w/modded box (no thermostat, and screens), Bilstein HDs w/strut plates, IPD anti-sway bars and upper and lower chassis braces, Volvo 240 OEM rear wing/spoiler, Euro repeaters, 15" Turbo Draco rims w/crappy Pirelli P4000s, Unitek cam, header and E-code lighting en route...








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Electric fan size...14' or 16' blade??? 200

    A perfect one would be a newer s60/70/80 fan. I did one this weekend and I got it off ebay for 51 bucks w/shipping. I have some pics of my installation on my website.

    http://www.uwm.edu/~keobrien/fan/

    I have way more flow than I could possibly use, but hell, my AC is bone chilling now :-D.

    Kevin








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Electric fan size...14' or 16' blade??? 200

      Kevin,

      That looks like a sweet setup!!! What type of relay and fan control system did you use? I was thinking about a Hayden one but not sure. By the way...how do you like your V15/Phase I cam in your 240...I'm waiting for mine to arrive.

      Best,
      Adam
      --
      '92 244GL silver-metallic, 142k, Hella 550 Front Fogs, K&N filter w/modded box (no thermostat, and screens), Bilstein HDs w/strut plates, IPD anti-sway bars and upper and lower chassis braces, Volvo 240 OEM rear wing/spoiler, Euro repeaters, 15" Draco rims w/crappy Pirelli P4000s, Unitek cam, header and E-code lighting en route...








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Electric fan size...14' or 16' blade??? 200

    Converted my 88 240 to electric this past weekend. Loving the mileage improvement. A 14 inch fan will do nicely. I was wondering about your E-code lighting. Where did you get them from?

    CAT








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Electric fan size...14' or 16' blade??? 200

      CAT,

      Actually I got a complete new E-code kit from the Netherlands...waiting for it to arrive. The person I bought it from had a post on the board a few weeks ago and also some auctions on eBay. His name is Ferenc and email is volvia@wanadoo.nl. He might still have some kits available. IPD also sells the kit but it is very expensive and you have to modify the existing chrome/plastic trims to fit. I've heard that www.alleuro.com also sells the e-code lighting too.
      Best,
      Adam
      --
      '92 244GL silver-metallic, 142k, Hella 550 Front Fogs, K&N filter w/modded box (no thermostat, and screens), Bilstein HDs w/strut plates, IPD anti-sway bars and upper and lower chassis braces, Volvo 240 OEM rear wing/spoiler, Euro repeaters, 15" Draco rims w/crappy Pirelli P4000s, Unitek cam, header and E-code lighting en route...







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.