Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Car still not running, update. 200 1988

posted by  cbremski on  Mon Apr 7 04:00 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Situation: Changed oil and valve cover gasket, now no start!
http://www.brickboard.com/RWD/index.htm?id=614097

Ok so here is an update on my predicament.

I changed the cap and rotor because they were nearly shot, still same problem. I will try unpluging the AMM to see if it starts. I am getting spark and fuel as I can see and smell both of them with the plug out and cranking. The cam seems to be turning because the timing belt moves. Everything I removed or moved during my maintenence was replaced in the correct order as well.

Besides the AMM, I cannot think of anything else to try. I read something about the ignition suppression relay, could this have an effect and where is it located? A sudden No-Start is quite confusing. Bentley doesn't cover too much on this type of situation (at least I haven't found it)and my Volvo Green manuals are limited to just fuel and engine work.

Any more advice is appreciated!
Thanks everyone.
Chuck
'88 244 159K





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Car still not running, update. [200][1988]
posted by  cbremski subscriber  on Mon Apr 7 04:00 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.