Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volt Gauge install. HOW? 200

Well I finally won a vlotage gauge meter on ebay,for my 88'245dl. It comes with no wiring so I will have to make my own...What gauge wire is recommended and where do I make the proper connections. Please be as detailed as possible. Thanks all








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volt Gauge install. HOW? 200

Just about any size wire will be fine. There's basically NO current here aside from the miniscule amount the lightbulb draws.
Connect + to any hot on the fuseblock, - to any ground, and the light wire to any dash lighting circuit lead.
--
Rob Bareiss, New London CT ::: "Roterande Fläkt Och Drivremmar!"








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Volt Gauge install. HOW? 200

Hello,

It's pretty idiot proof. There's a pos that goes to switched power on your car, the grounds from the light and the gauge do the obvious, and the brown from the light can splice in with one of your dash lights.

Happy Bricking

Richard

87 245 DL 349,000 km
82 242 GLT 121,000 km

http://members.cardomain.com/richink








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volt Gauge install. HOW? 200

http://www.brickboard.com/RWD/index.htm?id=320742
http://www.brickboard.com/ARCHIVES/1998NOV/20016764.shtml
http://www.brickboard.com/ARCHIVES/1997NOV/5389.shtml

hth

Erling.
--
My 240 Page







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.