Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 11/2014 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Used wagon springs: Have I got standard or HD? 200

I have pulled the rear springs from a wagon and intend to try them on my sedan. Is there a way to tell if they are standard or heavy duty springs? Also, to tell if they are original or aftermarket? Length, number of coils, wire thickness, a stamped number to look for?

Erling.
--
1987 240 GL 82K miles








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Used wagon springs: Have I got standard or HD? 200

    since no else has taken a stab at it, i will: i have only compared wagon springs and wagon overload springs side by side and the overloads are much thicker. i imagine that stock sedan and wagon springs look similar. i think the hD wagon springs would be too much for a sedan.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Used wagon springs: Have I got standard or HD? 200

      Thanks! I will check if there is any difference in thickness between the wagon springs I found and the sedan springs on the car. If they are reasonably similar, I'll do the swap. Like you, I do not think the HD springs would make my sedan happy, so I want to avoid those.

      Erling.
      --
      1987 240 GL 82K miles







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.