Does anyone know the P/N for the coolant temp sensor which feeds the ECU on 91 or 92 240's?

This is the one Worldpac shows for 89- that I have for a spare for my LH2.4 cars. Bosch #0 280 130 032. My spare has a black connector housing which is in contrast to the blue used in the LH2.0 system.


Photo lifted from one of the worldpac vendors.
--
Art Benstein near Baltimore

Art, you've come thru once again. You, Don Foster and Chris Herbst form a formidable team for keeping Bricks rolling!

Now - what did that ugly heater core (et al) come from, and how did the 75mm howitzer round find its way thru the flapper door?

smitty

"Now - what did that ugly heater core (et al) come from, and how did the 75mm howitzer round find its way thru the flapper door? "

It came from here:


That flapper door is the envy of my 84, whose door currently is held in the fresh air mode by a rubber ball.



I figure it must be a resolution inadequacy, because I wouldn't even plink at this with my imitation Ruger pellet pistol.
--
Art Benstein near Baltimore

Technology's a wonderful thing... when all else fails I tend to mentally resort to things ballistic and pyrotechnic! Glad you cleared up what was confusing me.

Smitty,

I do not know, but I am trying to find out. I am trying to replace mine in my 90 - 240. The part store gave me the gauge sensor, not the ECT sensor. If I find out in the next hour or so, I will respond again. Good luck. I haven't been able to get the old one out yet.

Don