Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

About those wheel locator pins 200 1989

posted by  Stuart-Fife on  Mon Nov 11 22:24 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 17 04:11 CST 2012
[RELATED]

The five bolts or studs that hold on the wheel are what holds the whole thing together. The locater pin is only there to prevent the wheel being put on in a different position after the wheel has been balanced on the car. Most people balance the wheel off the car so its not really important. It does hold the rotor to the hub, but only just, it's not a load bearing part. I don't think a 10mm bolt is really up to that job !!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New my baby has new turbo shoes on! [200][1989]
posted by  someone claiming to be ugly duckling  on Mon Nov 11 16:16 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.