Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

New wiring harness- injector connections - how to connect? 700 87

I just picked up a new (and expensive) engine wiring harness to replace the OEM dissolvable one on this 740. I didn't see any markings on the injector connections. They appear to be two lengths. Obviously the two short ones go to number 2 and 3 and the longer two to 1 and 4. Is this a trial and error connection process?








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: New wiring harness- injector connections - how to connect? 700 87

It doesn't matter; all the injectors fire at once.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: New wiring harness- injector connections - how to connect? 700 87

I had considered that as a possibility but wasn't sure. Thanks.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.