Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 steering wheel removal 200 '87

posted by  someone claiming to be Ryan Bennett on  Thu Sep 7 14:26 CST 2000 [RELATED]

Hello-

I'm trying to clean contacts and do a little maitanance behind the instrument cluster. I tried it today, but it's obvious that I'm going to need to remove the steering wheel. The Chilton maual isn't much help, so I was wondering if I remove the cover of the steering wheel, are the springs for the horn going to pop out? Also, when I remove the nut to get the wheel off, is it easy to re-align it again? Thanks a lot.

Ryan B.







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: 240 steering wheel removal 200 '87

posted by  someone claiming to be Steve on  Thu Sep 7 14:48 CST 2000 [RELATED]

Hello, it really may seem that you have to remove the wheel but you actually don't just slide the cluster up on to the wheel in its straight position, disconect all the wires and slide the cluster to the pass. side and out. and if you have to pull the wheel for something else just pull the horn pad at all 4 corners and it will come off no problem (you WILL need a steering wheel puller to get the wheel off though)

Good luck!

Steve






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.