Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volvo's new Injector seals look diff? 700 87

posted by  someone claiming to be Michael House on  Thu Aug 17 10:49 CST 2000 [RELATED]

Hi All,

I just picked up a set of fuel injector seal kits (donut, cap and spacer) for my 87 745Ti. The problem is that the grey spacer they came with looks and fits differently than the original. Is this supposed to be the case? Any sugggestions with the switch procedure would also be appreciated.

Thanks

Michael







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Volvo's new Injector seals look diff? 700 87

posted by  someone claiming to be Rene Svastal on  Thu Aug 17 17:11 CST 2000 [RELATED]

I have done this, and I was told to keep the old spacers and use them. The new spacers are too thin. The mechanics at the dealer evn re-use the old ones, after all, they don't wear out.

Rene






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.