Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cat converter/relocate problem on turbo 200 83

posted by  someone claiming to be RR on  Thu May 31 13:56 CST 2001 [RELATED]

Good evening,

Thanks everyone for help on soldering issues.Heres my last query for a while.My final 2 projects on the glt is to intercool and upgrade the exhaust from the 2 1/4"(I think stock)to a 2 1/2" exhaust with an aftermarket converter and a corresponding flowmaster.Heres the question...

I am hearing that relocating the turbo cat might be a legal issue but I found someone who can do it.Is there a performance issue with relocating the cat to the underside of the car nearer where the n/a cat would be?The reason is I have a 2 1/2" downpipe from a 740 turbo ready to go and larger cat would have to go on the underside,followed by the flowmaster and then run the exhaust out the side behind the rr wheel,as recommended by the muffler "pert.Good idea???

Thanks

RR





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cat converter/relocate problem on turbo [200][83]
posted by  someone claiming to be RR  on Thu May 31 13:56 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.