Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

D-jet intake manifold port question 1800 70

posted by  someone claiming to be Justin on  Thu May 24 08:42 CST 2001 [RELATED]

Hello,

The idle on my 1800 was just soaring after I put it all back together and I chased around all over the place looking for a leak. I also used the opportunity to clean and lubricate the distrebutor, only to discover that it didn't help at all. Anyway, I was able to find a leak at the crankcase breather on the side of tle block. I hose clamp solved this and all seems to be well.

My question is this: I recall taking that hose off the breather before and not having the idle jump up. Is it possible that I have the hose hooked up to the wrong place on the intake manifold? Do those 3 ports differ in any from each other? I just stuck them on where they happened to fit best. Just wondering.

Thanks.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New D-jet intake manifold port question [1800][70]
posted by  someone claiming to be Justin  on Thu May 24 08:42 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.