Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear bearings 200 1992

posted by  someone claiming to be Marcus on  Tue Dec 12 09:35 CST 2000 [RELATED]

The front bearings are fundamentally a snap. But how 'bout the rear ones. Do I need to have a machine shop do the pressing? If so, I'll try to have the Volvo dealer do it. But otherwise, is everything as simple as Bentley's would have me believe? Talked to somebody at RPR, when I ordered the parts. He sounded as though it's a really big operation. This may be a justifiable job. Somebody told me he heard a noisy wheel. I never have, but.......So, I'm replacing races and bearings while I'm in there. Please comment.

-Marcus







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Rear bearings 200 1992

posted by  someone claiming to be Paul Seminara on  Tue Dec 12 09:56 CST 2000 [RELATED]

Actually is is an easy job. The only real hang up is: you'll need a 20 Ton press for the bearing retainer ring or you just pay a machine $10 a pop to press for you.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.