Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What glue to use for reverse light lense? 200 81

posted by  someone claiming to be Larry on  Mon Dec 4 17:36 CST 2000 [RELATED]

The small clear reverse light lense fell off of my wagon exposing the light body and bulb. I know this is a common occurance but what type of glue or sealant is used to secure it back in place?

Thanks,

Larry







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: What glue to use for reverse light lense? 200 81

    posted by  someone claiming to be Chris Mullet on  Tue Dec 5 00:39 CST 2000 [RELATED]

    If you're gluing plastic to plastic, I've had good luck with model airplane glue.







    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Re: What glue to use for reverse light lense? 200 81

      posted by  someone claiming to be Brian Oliver on  Tue Dec 5 04:07 CST 2000 [RELATED]

      Stuff works great on plastic turn signal lenses etc., but you'll never get it apart again!







      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        Re: What glue to use for reverse light lense? 200 81

        posted by  someone claiming to be Chris Mullet on  Tue Dec 5 05:18 CST 2000 [RELATED]

        "Stuff works great on plastic turn signal lenses etc., but you'll never get it apart again!"

        That's the whole idea.







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: What glue to use for reverse light lense? 200 81

    posted by  someone claiming to be Dave Stevens on  Mon Dec 4 18:33 CST 2000 [RELATED]

    The Volvo replacement lens comes with a small tube of clear RTV silicone sealant and it seems to hold well. Best to choose an exterior/marine grade sealant with UV inhibitors. Clean the mating surfaces with something like isopropyl (rubbing) alcohol for good adhesion.







    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Re: What glue to use for reverse light lense? 200 81

      posted by  someone claiming to be Mike on  Tue Dec 5 02:13 CST 2000 [RELATED]

      Marine silicone sealant is definitely the answer. 7 years ago I siliconed on the stern light lens on the transom of my sailboat. Every spring I check it and it's never budged. I also know that if I have to remove it I can use an x-acto blade.

      Mike






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.