Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Are ign. modules for auto/manual trans interchangeable? 200 84

posted by  someone claiming to be Csaba Vandor on  Tue Oct 31 15:26 CST 2000 [RELATED]

Hello,

I recently bought a '84 245DL (auto trans) with a blown engine and some missing parts (AMM, ignition module). I have a wrecked '85 244DL (manual trans) with a complete engine that I am going to transplant into the '84 including the FI and ignition systems.

I have heard that the 'chrysler' type ignition modules are different for the auto and manual tranny cars. Is there going to be a problem using the module that came in a manual trans car with an auto tranny?

TIA,

Csaba







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Are ign. modules for auto/manual trans interchangeable? 200 84

posted by  someone claiming to be Brian Leppin on  Tue Oct 31 15:33 CST 2000 [RELATED]

Stick and auto doesn't matter, the year however is different. late 83 and 84 use a 295 computer and an 85-87 use a 107 computer. I think you will be ok if you use the engine complete with the harness,007 amm, 107 ign box and the 511 computer. Good luck Brian






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.