Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2019 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re-surface PV flywheel? 444-544

posted by  planetman on  Wed Jul 17 09:02 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

When Volvo updated the clutch pressure plate to a diaphragm style, they also updated the flywheel.

1 of the critical features of the updated flywheel is a recess at the center that is for clearance for some of the rivets on the pressure plate.

If you still have old style of flywheel, the rivets will eventually contact the flywheel and cause the clutch to slip.

This recess can be machined into the old style of flywheel.

I suggest you post a picture of your flywheel before you take it to the machine shop.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Re-surface PV flywheel? [444-544]
posted by  someone claiming to be PVGuy  on Mon Jul 15 14:52 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.