Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Tripple Gauge Panel for Upper Radio Slot 200 1981

I'm looking for one that takes the standard 52mm VDO gauges. gmail johnsf2000









  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Tripple Gauge Panel for Upper Radio Slot 200 1981

    Hi,

    That’s going back a lot of years if you are wanting one for a 1981.
    That system was popular for several years later.

    It has been a long time since I took the one I have out of a car and I’m thinking it was a turbo car?
    It is something like that shown but mine has a gauge or two still in it.
    Probably the boost and something else?
    I probably wanted a tachometer or a voltmeter.

    I was rummaging through my stash of collected stuff last week when I was home there for a week.
    They usually have three gauges in a mount made to hold them.
    I may only have the mounting piece or possibly a mask plate too?
    I got the whole array at once because it’s cheaper to buy bigger chunks than let them piece meal you to death at checkout!

    You need to tell us more about what you are looking for and for what?
    The picture is only the masking plate that clips into the dash mounting in front of the gauges.

    When gauges are used vertically the mask plates are two separate pieces.
    I know I have a couple of those.
    In fact I have NOS ones I got from RPR when they closed the business.
    I have a few other things new too but haven’t made a list. He sold me stuff that I will never use for different Volvo model cars. So, in essence I help him move out.
    He had a deadline to sell the place in Albany, California. Rusty retired to Napa California.

    Now that I got you all spun up on what I might have, I have a let down!
    The Trouble is, I’m not going to be at that house for a couple more months so I just cannot go peek at it!

    If you don’t have any luck locating what you are looking for, I can be a backup contact here on the board.

    Phil









    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Tripple Gauge Panel for Upper Radio Slot 200 1981

      I have a couple of those complete panels and some loose gauges. I also have a few of the small tachometers that fit in the center of the '73-'74 140 and '75-'80 240 clusters. E-mail me at fastforwardphoto(at)yahoo(dot)com -- Dave








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Tripple Gauge Panel for Upper Radio Slot 200 1981

        Thanks. My '81 DL non-turbo has the later dash design so I don't know if the early 200 stuff will fit. I already have three 52mm VDO gauges: Voltage, Oil Press, and Oil Temp.

        I used to have a Volvo digital radio installed in that upper space but it failed some time ago and I find I don't really need a radio.








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Tripple Gauge Panel for Upper Radio Slot 200 1981

          I answered your e-mail John. That leaves me with a bunch of loose gauges and one complete 3 gauge set up if you want the other 3 gauge frame and cover that I have. -- Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.