Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2024 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head Gasket - Which is Best? 900 1994

posted by  Townshend Act on  Sat Apr 17 04:01 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 7 22:44 CST 2014
[RELATED]

My B230FT is leaking oil externally from the low, rear side of the #4 cylinder. Also seeping coolant externally on the intake side, around the #2 and #3 cylinder.
No driving issues and turbo is sound.
Cylinder head comes off tomorrow and will be leak tested and resurfaced at the machine shop.
I’ll check the block deck for trueness and deal with any irregularities.
TTY head bolts will again be replaced.
Q: Who is currently making the BEST cylinder head gasket? Second time in 3 years I’ve had to pull the head and deal with these external fluid leaks.
Thanks everyone!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Head Gasket - Which is Best? [900][1994]
posted by  Townshend Act subscriber  on Sat Apr 17 04:01 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.