Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2012 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cold Start Injector Hose / Pipe 200 1989

posted by  FattyArbuckle on  Sun Dec 13 08:27 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jan 11 11:56 CST 2012
[RELATED]

1989 245 2.3L FI

Looking for replacement for the hose / plastic pipe that goes from fuel rail to cold start injector. The Volvo part number was 1317061.

Redid fuel system recently as plastic pipe near HP fuel pump cracked, sprayed fuel all over, but (luckily) didn't cause a fire. So I replaced that pipe, decided to put in fuel injector o-rings, etc. BUT Volvo no longer makes the plastic pipe that goes from the fuel rail to the cold start injector. The Volvo part number was 1317061, but dealer says discontinued. I tried IPD, but they didn't respond, so I guess they don't have it either. Would like to replace this pipe / hose before catastrophic failure. Any suggestions ?








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Cold Start Injector Hose / Pipe 200 1989

    posted by  Will740turbo on  Tue Dec 15 11:13 CST 2020
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 16:09 CST 2014
    [RELATED]

    I would call around to some diesel shops. You may need to get the hose custom-made. That's fairly easy when it is still in one piece, as long as you can find someone willing and equipped to do it.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Cold Start Injector Hose / Pipe 200 1989

    posted by  dobber13 on  Sun Dec 13 10:40 CST 2020
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sat Oct 18 19:10 CST 2014
    [RELATED]

    You can try Tasca Parts. Put an add-in parts wanted here and on the Brickboard, someone may have a used one.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Cold Start Injector Hose / Pipe 200 1989

      posted by  planetman on  Sun Dec 13 17:15 CST 2020
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Oct 24 09:29 CST 2014
      [RELATED]

      If all else fails you can replace the plastic hose or have someone else replace it for you.

      --
      Eric
      Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
      Torrance, CA 90502
      hiperformanceautoservice.com or oldvolvosonly.com







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.