Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1985 front caliper bolt size 200 1989

posted by  will rehsper on  Tue Jul 28 06:07 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 3 14:55 CST 2012
[RELATED]

Sounds like we've converged upon a Grade 10.9, M12x1.75, 35mm long screw like this one from McMasterCarr https://www.mcmaster.com/90180A647/ (or PN 90854A229 if you prefer your zinc coating yellow chromate flavored instead of blue dye).

But I'd like to back up a moment and inquire Walter as to why you're replacing the fasteners? That these screws are so hard to track down suggests that most folks simply reuse them with a bit of threadlocker.
--
XC60 / Odyssey






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 1985 front caliper bolt size [200][1985]
posted by  Marlin Mangels subscriber  on Sun Aug 12 11:58 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.