Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Yet another crank no start thread 200 1991

posted by  vadimk11 on  Sat May 23 18:36 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 24 22:04 CST 2011
[RELATED]

I am sure this was answered before, but I would like to double check that I am on the right track. 1991 240.

I have spark (verified with an inline spark tester), have fuel injector pulse (verified with a noid light). When I put a jumper between fuse 4 and fuse 6, I hear a hum. I think it is just the in-tank pump that I hear. When I touch the other pump and connect the jumper, I don't feel anything.

So, my question is, should I feel the pump vibrate, or hear it as I am under the car, when fuse 4 and fuse 6 are connected? And if so, it's down to two things, either the pump, or the pump wiring, correct?

I can't check the fuel pressure because I don't have a valve on the rail, and if I disconnect the rail it turns out I don't have a right fitting to connect my fuel pressure gauge.

Thank you in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Yet another crank no start thread [200][1991]
posted by  vadimk11  on Sat May 23 18:36 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.