Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Melting tail lights 200 1990

posted by  Burco on  Sun Jan 19 12:20 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 21 13:42 CST 2007
[RELATED]

Never thought of the issue being water related.
Had an old HVAC instructor tell me " You can test a lot of things in a lab, but you can not test time." Makes sense to me.
The method I used was to toss the flex boards and connect the wiring to the bulb holders with solder. The replacement tail lights had heat deformity. I never thought of soldering directly to the flex board. I have had as many issues with the wires connector as with the bulb to flex board area.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 I hard wired my 240 Taillights [200][1990]
posted by  Burco subscriber  on Fri Jan 17 08:58 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.