Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bell housing-1975 240 with B20 200 1975

posted by  Jim Perry on  Fri Dec 6 13:15 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 31 09:37 CST 2014
[RELATED]

Eric,

"What year is your 1800? 1962-1968 with a hydraulically operated clutch or a 1969-1972 with a cable operated clutch?" It's a '62 but all that is irrelevant. The body is Volvo, the block and head are Volvo, but beyond that ... (see www.pandbmotorsports.com)

"Since your racing transmission is based on the M47, you are going to have to start with a later bellhousing than the 2 I have mentioned." Well, I have one, and I was after a second. The PN 1023519 works without ANY modification. If I could just learn what 1023519 came from, I would have a fighting chance of finding a second.

"AFAIK, the only way to adapt a late M46 or any M47 to a B18/B20 is to cut the bellhousing and reweld it back together in the correct reclocked position." Glad to know that might be possible.

jim






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Bell housing-1975 240 with B20 [200][1975]
posted by  Jim Perry  on Thu Dec 5 12:33 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.