Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Odd flexing/joint popping sounds on turns/steering issues 200 1989

posted by  Michael Yount on  Tue Nov 12 06:32 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 20:03 CST 2014
[RELATED]

When you loosened/re-tightened the control arm nuts -- was the suspension at ride height or was the car jacked up? Those stock bushings are designed to twist with the movement of the suspension --- and so should only be torqued to spec with the car sitting at ride height. If you loosen/tighten them with the suspension at full droop (as when working on the strut replacement) you will put them in a heckuva bind. I think watching as someone turns the wheel is a reasonable idea.
--
82 242-6.2L; '17 Mazda3; '16 Crosstrek






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Odd flexing/joint popping sounds on turns/steering issues [200][1989]
posted by  stallison subscriber  on Mon Nov 11 16:57 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.