Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

93 240 hot start issue 200 1993

uid 27's pic
posted by  Art Benstein on  Fri Nov 8 05:27 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Just a note on this old thread* -- the cold start injector disappeared from the 240 after '91.

Even so, an open circuit in the engine coolant temperature (ECT) sensor would definitely be one good reason the car would be difficult to start, hot or not. The crusty connector is just as often the cause as is an aged sensor, and it should identify itself with a 123 DTC code from the OBD.

* this thread was duplicated here https://www.brickboard.com/RWD/volvo/1668536/220/240/260/280/93_240_hot_start_issue.html
--
Art Benstein near Baltimore






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 93 240 hot start issue [200][1993]
posted by  Burco subscriber  on Wed Oct 2 03:25 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.