Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2015 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

245 volvo plastic parts- losing the war against the crumbles 200

hi sages- here must be a very common problem. my 92 245 needs those white plastic sun visor hold down clips and a windshield washer juice reservoir. both have cracked and crumbled given their age. did my due diligence checking partsgeek, ipdusa and fcpeuro and no soap. thinking junkyard trip will be a waste of time since their plastic volvo parts are notorious for crumbling . other manufacturers(dodge, ford,chevrolet) don't seem to have this problem. any thoughts or sources. thanks tons oldduke








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    245 volvo plastic parts- losing the war against the crumbles 200

    Look again on FCP and put in the visor clip part number, 1360896.

    As far as the reservoir try http://www.skandix.de/en/spare-parts/body/wipers-parts/cleaning-water-system/water-tank/1024067/ or tascaparts.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    245 volvo plastic parts- losing the war against the crumbles 200

    I found a washer tank that wasn’t too damaged. Until then (and maybe later), I was considering mounting a 50’s-60’s Ford washer bag in it’s place. Wouldn’t hold as much, but would work.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    245 volvo plastic crumbles in the way - VW clip parts work ... ? 200 1992

    Uncle Old Duke,

    The interior color of your 1992 240 Wagon is ... ?

    Though the washer juice (ha!) reservoir is the same no matter interior color.

    Also, if crumbling plastic concern, a close look at the coolant expansion tank. See any crazing (fine fracture lines around the plastic).

    Read this thread for new 245 clip solutions:

    https://www.brickboard.com/RWD/volvo/1570981/220/240/260/280/ill_one_better_porsche_part.html

    If replacing interior platic bits, black is best, blue is next, and the browns dark to beige not so good as paler the color gets.

    Hope that halps yooooooo.

    Happy Sundae!

    Buttermilk Boy.

    --
    Give your brickboard.com a big thumbs up! Way up! - Roger Ebert.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      245 volvo plastic crumbles in the way - VW clip parts work ... ? 200 1992

      hi kit g- will try volkswagon part. btw how do you go from that Porsche email address/website without hand copying the address and then typing it on the address bar. I would like to do it in two buttons clicked. thanks ton oldduke








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        245 volvo plastic crumbles in the way - VW clip parts work ... ? 200 1992

        Left button select the text URL. Right-click contextual menu copy.

        In a new browser window, empty address bar, in most browsers, right-mouse button contextual menu --> choose Paste and Go.

        Though no links. What appear as links are image references:





        And the part VW numbers:

        And of course the part numbers, if you want to go out to the VW dealership to buy a set for yourself:
        3B0 857 561 BY20 . . . Pearl grey
        3B0 857 561 BB41 . . . Black
        3B0 857 561 B8YS . . . Light Beige

        For the clip-on dress cover:
        3B0 857 563 BY20 . . . Pearl grey
        3B0 857 563 BB41 . . . Black
        3B0 857 563 B8YS . . . Light beige
        --
        Give your brickboard.com a big thumbs up! Way up! - Roger Ebert.








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          245 volvo plastic crumbles in the way - VW clip parts work ... ? 200 1992

          hi kit g- on this forum you , art b and a few others have been very helpful over the years in helping me fix the 245 conundrums and avoiding the cleaners from the shysters. I fear though this time we are cornered at Bastogne with no clips left for our thompsons or .45s. none of those sources panned out . thanks for the tip on the url links. it worked. no 240s left in the yard here . seems even fcp and ipd on this item have gone the way of the clutch pedal. with even sears now circling the bowl,may have to jerry rig and fabricate a repair . moe said what are you worrying about. you know how many times we had to do that on the beach with the shermans . another suggested whittling. never thought of that one. if you have a way out of point du hoc, let me know. thanks tons oldduke








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    245 volvo plastic parts- losing the war against the crumbles 200

    On a related note, what are parts for the 240s that we should get from junkyards as spare parts?








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      245 volvo plastic parts- losing the war against the crumbles 200

      ECUs








      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        245 volvo plastic parts- losing the war against the crumbles 200

        Thanks.

        By ECU, do you mean the silver box next to the passenger's right leg?

        How do I know whether a junkyard ECU is compatible with my particular model?

        Thanks








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          How do I know whether a junkyard ECU is compatible with my particular model? 200

          The fuel injection ECU is in a 'silver' case. Galvanized steel, the housing is.

          On labels is the Bosch part number and possibly the Volvo PN.

          All LH-Jetronic models listed here.

          http://www.nuceng.ca/bill/volvo/database/ecu.htm

          Dunno what is updated more often. Prolly neither.

          https://www.brickboard.com/FAQ/700-900/EngineFIComputer.htm

          The asinine and crass issue is the pairing of the fuel and ignition ECUs that neither list 'lists'.

          Remove the kick panel to the right of your reight knee or lower leg to view the box and label. The label may be partially obscured by the retaining bracket.

          Though you should be able to test connected sensor and devices engine control usues to find fault using a digital electric multimeter.

          You're referring to your 1908, 1988, 1980 240?

          If 1988, you more than likely have the Chrysler-MPG ignition. The box is mounted to the rail containing the washer fluid reservoir. If not faeded or peeled away should be a blue lavel with Volvo on it. A vacuum line connects to it.

          Dave Barton image:


          Another view for you.

          --
          Give your brickboard.com a big thumbs up! Way up! - Roger Ebert.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    245 volvo plastic parts- losing the war against the crumbles 200

    saw on fleabay

    https://www.ebay.com/itm/VOLVO-240-WAGON-140-WAGON-1800-es-WAGON-Sun-Visor-Clip-PAIR-2-NEW-1360894-/362443425312
    --
    '91 244 205k auto







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.