hi arty b- your picture is very good . got the switch to slide out downwards from the bezel(think that's the name ) plate in which the 5 switches sit. had unplugged the wires first. now I'm pondering whether to take the switch apart or just buy a new one. rock auto has it for 4.95. fcp for 8.95. dealer for 1 million. anyway using the small blade in my swiss army knife and being very gentle and gingerly, I slightly bent back both plastic clips. miraculously neither broke. I pushed the switch forward just enough to clear the tang (pushed downward on the switch) and it slid out. if I take it apart clean it and file the contact points and it still doesn't work properly then I would have to do the job over.not sure how many additional take outs and put backs those clips and tangs will withstand. guess I could try it for a while with the switch plugged in but hanging outside the bezel plate. but if my friends and enemies saw it like that they would heckle me for driving a bohemian jalop from woodstock. would be worse than my stoplight launches in first gear where I get cussed. my feelings would then be hurt being a sensitive guy as you know. even kit g might think I'm a bum. what say you my brutha sage. thanks tons oldduke