Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changed timing belt, now engine sputters, stalls and smokes: blown valves/pistons? 200 1987

posted by  1pocket on  Sat Jan 20 16:11 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

no real damage done.
you have to go back to square one and set the timing harmonic balancer at TDC.

then peak at the camshaft sprocket and see how many teeth its off. and ensure you rotor under the diz cap is pointing to #1.

get that sorted out and you ought to be good progressing from kindofhandy to actuallyhandy...:)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Changed timing belt, now engine sputters, stalls and smokes: blown valves/pistons? [200][1987]
posted by  Kindofhandy subscriber  on Sat Jan 20 16:06 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.