Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2010 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

PV 544 Kingpin Rebuilds 444-544

Looking for info to rebuild kingpins on PV 544 please








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    PV 544 Kingpin Rebuilds 444-544

    The whole spindle assembly has to be removed so its a major job. The spindle has to be disassembled and the king pin bushings have to be pressed out, new ones pressed in and then the bushings have to honed to fit.

    I have the press work and honing done at my machine shop.

    The king pin kits are still available and I usually have them in stock.
    --
    Eric
    Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
    Torrance, CA 90502
    hiperformanceautoservice.com or oldvolvosonly.com








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      PV 544 Kingpin Rebuilds 444-544

      Thanks; I have the kits( was Hoping to do this in my garage, but looks too daunting. Appreciate the feedback.








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        PV 544 Kingpin Rebuilds 444-544

        Just remember to count the shims while disassembling. This will help in keeping the alignment correct.....Machine Shop the job.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.