Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Swapping a caliper - bleed the whole system? 200 1993

posted by  Michael Yount on  Mon Dec 5 12:46 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 20:03 CST 2014
[RELATED]

Put a piece of tape over the vent hole in the reservoir cap, fill the reservoir to the top and tighten the cap. When you break open the caliper line, you'll lose virtually no fluid at all -- and this will enable you to simple bleed the line(s) associated with the caliper you replaced.

Of course, if it's time for a system bleed anyhow.....






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swapping a caliper - bleed the whole system? [200][1993]
posted by  woodshavings  on Mon Dec 5 11:21 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.