Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

For Mike66 and his green 1976 245 200

uid 27's pic
posted by  Art Benstein on  Wed Aug 3 04:31 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Change Brake Master Without Wheel Bleed:

Rag under master.
Prepare new master bench bleed.
Pull brake light fuse #8 and block pedal.
Disconnect old master.
Plug old master's ports.
Remove pedal block.
Remove old master (17mm with wobble or universal)
Bolt up new master with bleed tubes in place.
Block pedal.
Disconnect bleed tubes.
Connect lines but don't tighten.
Unblock pedal.
Crack each fitting one at a time and allow to drip into rag until steady.
Tighten.
Check pedal and clean for leak checks.
--
Art Benstein near Baltimore

This is the unsolicited stuff Craigslist warns about.:)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 For Mike66 and his green 1976 245 [200]
posted by  Art Benstein subscriber  on Wed Aug 3 04:31 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.