Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Idle Air Control (IAC) Valve - Removal - B21FT 200 1985

posted by  brickdpeters on  Mon Mar 21 04:09 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 17 09:29 CST 2013
[RELATED]

See K-Jet In Detail:
http://www.k-jet.org/articles/information/k-jet-in-detail/

Go to the Constant Idle Speed (CIS) System section.

"The CIS system is found on 1981.5 N/A 240’s, 1982 K-Jet 240’s (1982.5 240’s were LH-Jet 1.0), and 1981 to 1985 240 Turbo’s."

"The idle air motor on a K-Jet car has three wires attached to it and two large vacuum lines (1inch in diameter)... On a 240 Turbo, it is bolted to the underside of the intake manifold..."






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Idle Air Control (IAC) Valve - Removal - B21FT [200][1985]
posted by  brickdpeters  on Sun Mar 20 10:31 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.