Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Kick down button transmission 200


I'm certainly no electronics expert, but it is most likely the overdrive relay or corroded OD wiring from shifter to solenoid that is preventing the 3rd to 4th gear shift. Check the tranny tunnel "lip" where the wiring leaves the shifter and goes under the car. My 90 rubbed there and wore off so much wire insulation that the wires corroded and caused the shifting failure. Also check the wiring where it attaches to the solenoid.

I have no clue what the noise is...:)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Kick down button transmission [200]
posted by  jonny2box  on Wed Mar 16 16:39 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.