Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS Wiring Diagram 200 1993

Art, or anybody else familiar with electronics: what do the grounds inside the arrows mean inside the ABS control module (K) on the below picture? Is this a ground that is made or broken by the module? If I wanted to cycle solenoids (N, O, P) from the engine compartment would I need to jump the relay and switch the grounds as well? I don't have the Bentley in front of me, can't remember which pin it suggests grounding at the connector to activate the solenoids.








THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 ABS Brakes . . . again [200][1993]
posted by  scorron subscriber  on Fri Sep 25 06:50 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.