Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Knock sensor wiring 700

Hello everyone,

I am replacing the wiring harness on my 1987 760 turbo and need some info on the knock sensor wiring. My original harness had been repaired many times and probably been altered somewhat. While removing it, I noticed the knock sensor wiring was incorporated into the old harness. The new harness does not have a knock sensor connection. I was told that the knock sensor was not part of the engine harness but had a separate connection directly through the firewall to the ignition box. Can anyone help me out here ? I am probable going to have to run some new wiring.

Thanks,
Mark








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Knock sensor wiring 700

Scroll down to "EZ 117K Ignition system, B230FT". Knock sensor is #218.

http://www.autoelectric.ru/auto/volvo/740/1989/740-89.htm
--
Post Back. That's whats makes this forum work.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Knock sensor wiring 700

i have a 88 700 that would also benefit from info on this wiring.
photos of the knock sensor wiring managment would help very much, as the
wiring schematics dont really show the actual harnness path.
Thanx







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.