Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2015 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

89 245 how to check oil separtor 200

my engine seems to have to much back pressure..like blowing out of oil filler hole when I take the cap off...leaks oil out of camshaft seal. Thanks,
Kris








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    89 245 how to check oil separtor 200

    Got it! Little "S" shaped hose between the flame trap and oil separator was totally plugged. I am going to replace the oil separator also for good measure mainly because I broke it getting it out.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      89 245 how to check oil separtor 200

      "I am going to replace the oil separator also..."

      Past cracking/splitting issues with aftermarket brands. It would be best to buy a Volvo labeled one. Review the FAQ and old posts.

      Tom








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        89 245 how to check oil separtor 200

        Hi,

        Adding to Javalion's post if you're going to replace any of the hoses associated with the flame trap (s-shaped hose or hose that connects to intake) you will also be warned to use Volvo parts. I have bought both hoses before (aftermarket MTC brand) and neither lasted a year.

        Travis







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.