Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bleeder screws that work 200 1992

posted by  riverbend on  Thu May 7 07:14 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

The hex on the front caliper bleeder screw became a size that no wrench would fit.

The thread for that bleeder is 1/4-28. Napa part number 27864 fits and works. The hex is somewhat more substantial then the stock screw.

The rear ATE caliper bleeder is an M7-1.0 pitch thread. Napa part number 23928 works for those.

Not having tried these on your car, you will have to make sure that they work for you. Brakes are important...

Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 Bleeder screws that work [200][1992]
posted by  riverbend subscriber  on Thu May 7 07:14 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.