Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel Injector Temp Sensor Location 200 1993

Looking for the fuel injector temp sensor on my '93 240. Bentley Manual says it is between the EGR Valve and the Intake. Where? There are several sensors in this area. I'm a visual person, so any help is appreciated. Thanks in advance!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel Injector Temp Sensor Location 200 1993

i think you mean the coolant temperature sensor which is part of the fuel trim loop............this is NOT the water temperature sensor which is depicted on the cluster water temp gauge

anyway the coolant temp sensor is located intake manifold side 'underneath' between injectors 3 and 4.

it is hard to see.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel Injector Temp Sensor Location 200 1993

Thank you, thank you! IPD and the Bentley manual is what I was going from on terminology . Thanks to you, I now know where it should be, whatever it may be called. And hopefully it will clear my engine light and increase my mileage (hopefully), though 23+ mpg isn't too bad for the old girl, I guess. I love my Brick, but wish it were pre-technology!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.