Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2010 444-544 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater blower 444-544

S 10 and other blowers can be used, but you need to make an adaptor plate from MDF or similar about 5/8" thick to clrar the bottom of the housing. I found a 12 volt 2 speed motor on e bay with the right shaft size and used the old squirrel cage.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Heater blower 444-544

That sounds like something I should get more info on. Can you give me any more specific information on the motor you used. make model etc? or alternates, two speed would be awesome on my 544.
Thanks
Steve








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater blower 444-544

I found several new 12v DC 2 speed appliance motors on e bay and
bought one for about $50.00
The shaft is 5/16" x 1 1/4".
The label is hard to read, but looks like this:
DCM Corp Valley City Ohio
D001 400
RVO1 10306
10380 3789 12V








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater blower







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.